TA Series Torque Arm Reducer

Bonfiglioli’s TA series of torque arm reducers has long set the standard for reliability and affordability in heavy industrial settings, such as quarrying and mining.  With little requirement for maintenance, the TA is also favoured where downtime must be kept to a minimum.

TA Series Design Features

The main design characteristics of the TA series are:

• High efficiency
• Quiet operation
• Gears in hardened and case-hardened steel
• Gear case from cast iron
• Paint coating as standard

TA Options

An easily-mounted backstop option extends the usability of the TA series, preventing backdriving in the case of incline conveyors.

Units are factory-filled with synthetic lubricant.

Viton oil seals are an option.

The TA series catalogue is downloadable by clicking here.

WEG’s W22 mining motor range starts at 0.18kW (63 frame) and extends to 355kW (355 frame), in 240/415V in 63 to 100 frame and 415V 112 to 355 frame.  Voltages up to 1100V are available on request.

The WEG range of mining motor comes standard in 2, 4, 6 and 8 pole, with 10 and 12 pole options.

Mining Motor Typical Applications

• Machine tools
• Looms
• Packing machines
• Washing and bottling machines
• Cranes
• Elevators
• Printing machines
• Conveyors

Mining Motor Standard Features

• Output: 0.12 kW up to 415 kW
• Frame 63 up to 355 A/B
• Mounting: B3R(E)
• Voltage: 400/380/415V
• Class “H” insulation (ΔT=80K)
• Degree of Protection: IP66 with labyrinth W3seal
• Terminal Block (6 pins)
• Thermistor (2/phase) rated 155ºC and 180ºC
• Resin continuous flow impregnation
• Grease nipple system
• Rubber drain plug
• Main terminal box with removable gland plate
• Main and auxiliary terminal boxes
• Standard color: Munsell 2.5 YR 6/14 (Orange)

Options Available

• Thrust Bearings
• Shaft earthing brush
• Blower kit
• Double shaft extension
• Stainless steel shafts
• Anti-condesation heaters
• Bearing and winding RTDs
• Cable glands

To our valued customers and suppliers, we thank you once again for your continued support during 2023.

The All Torque team wish you and your families a Merry Christmas and a safe and Happy New Year.

Our Braeside Melbourne Head Office will be closed Friday 22^nd December along with the public holidays only.

Our various branches in Preston Victoria, Glendenning NSW, and Rocklea Qld, will be closed Friday 22^nd December and re-open Tuesday 2^nd January 2024. 

Please note that during our absence, all calls to these locations will be diverted to attend to your requirements.

Due to their torsional flexibility N-EUPEX couplings offer the possibility of moving critical torsional vibrations from the operating area of the mechanical equipment in such a way that no negative effects on the drive train are to be expected.  N-EUPEX couplings are made of high-quality cast iron.  The flexible elements made of synthetic rubber (buna N) are available in different degrees of hardness for many applications.  Metal pins and flexible elements are so designed that no wear occurs when properly fitted.

N-Eupex Applications

Widely used in the whole field of mechanical engineering, as high-speed coupling on the motor side (e. g. pump, fan or compressor drives) as well as high-torque couplings for the connection of gear unit and driven machine (e. g. mills).

N-Eupex Advantages

• Coupling to be used universally for compensating shaft misalignments
• Maximum operational reliability, since fail-safe
• Suitable for plug-in assembly and simplified replacement of elements in the type consisting of three parts
• Dynamic adaptation by selection of elastomer hardness
• Torque range from 19 Nm up to 62,000 Nm for 23 sizes and 10 different types
• Can be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)
• High degree of availability of parts ex stock